Skip to content
Call (828) 470-1105Licensed, bonded & insured

Weaverville Countertop Upgrades for Newer Kitchens and Old Farmhouses

Buncombe Custom Countertops is a trusted Buncombe County specialist in countertops in Weaverville, NC, specializing in quartz upgrades, quartzite and soapstone for kitchens that have outgrown their builder tops. We offer butcher block island countertops and new bathroom vanity tops.

  • Free in-home measure
  • Slab approved before any cut
  • Licensed, bonded & insured

Get a free countertop estimate

Or call (828) 470-1105. Calls only, we do not receive text messages.

Countertops for Weaverville

Our team provides careful tear-out over cabinets you keep, delivering upgraded countertops without a full remodel for both residential and commercial projects. We lay out the seams on the slab you pick and send that layout for your approval before our own shop makes a single cut, so each join lands where you agreed.

From lifting off a laminate top without scarring the cabinet faces to setting a quartzite island, our team handles every detail. Serving Weaverville, with Woodfin and Asheville to the south, we fit measures around school runs and work days.

Why Buncombe Custom Countertops

How We Work

The crew that measures your kitchen is the crew that sets the tops.

Written quoteSlab, edge profile, cutouts and seams listed line by line
Slab firstYou approve the slab, or the quartz sample, before we cut
Templated on siteMeasured on your cabinets after they are set and level
Access checkedThe drive, the steps and the carry path looked at before install day

Upgrading a newer Weaverville kitchen

Countertops in a newer Weaverville house are usually a builder-grade upgrade: the laminate or entry granite the house came with comes out, and quartz or quartzite goes onto the cabinets that stay. Weaverville, chartered in 1875 and about 9 miles north of downtown Asheville along Interstate 26, grew quickly between the 2010 and 2020 censuses, and a lot of its housing went up in the 2000s and 2010s. Those kitchens are now old enough for a first change of top and young enough that the boxes underneath are still sound.

What comes out

Builder laminate usually shows its age first along the front edge and around the sink. Entry granite from the same years is often a busy, speckled slab with a flat eased edge and a short four-inch splash. Either one lifts off in a morning, and the tear-out line on your quote covers removal and disposal.

What goes in

Quartz is the most common replacement. Engineered stone is about 90 to 93 percent silica by weight bound in resin, so it needs no sealing and gives an even color, though it is less heat resistant than natural stone and wants a trivet under hot pans. Quartzite is the step above: a natural metamorphic stone that is harder and more stain resistant than granite, with movement no factory slab has.

What stays

Builder cabinets from these years usually carry stone well. We check that each run is level and fastened, confirm the sink base is square, and add a support rail wherever a heavier top or a new overhang calls for one.

Is your quartzite really quartzite?

A slab sold as quartzite should be tested before you buy it, because some softer stones, including marble and dolomite, are sold under that name. The difference matters in a Weaverville kitchen built for daily cooking: true quartzite resists scratches and acid, while a softer stone labelled quartzite can etch from lemon juice or wine.

  • Ask the stone supplier what the slab is geologically, not only its trade name.
  • Put a drop of lemon juice or vinegar on a sample for a few minutes and look for a dull ring.
  • If it fails, you have learned that before paying quartzite prices for it.

We will look at any slab you are considering during slab selection and tell you plainly what we see. If a slab fails, quartz or a hard granite gives a similar look for the money.

Stone fabrication shop with tall granite, quartzite and marble slabs on steel racks along both walls, a cut marble top with a sink opening on a padded bench, and mountains through the windows

Farmhouse kitchens along Reems Creek

Weaverville's second market is its older farmhouses, especially toward the Reems Creek community, and there soapstone or wood usually suits the house better than quartz. Reems Creek runs through town beside Lake Louise Park, Governor Zebulon B. Vance was born in the Reems Creek community, and five Weaverville properties are on the National Register, including the Dr. John G. and Nannie H. Barrett Farm, the Brigman-Chambers House, the Joseph P. Eller House and the Zebulon H. Baird House.

Soapstone

Soapstone is rich in talc, which rates 1 on the Mohs scale, so it is soft and scratches, but it takes heat well and stores it, and it darkens into a patina with use. In a farmhouse kitchen that patina reads as age, not wear. It pairs well with an apron-front sink and open shelving.

Butcher block

Butcher block comes as edge grain or end grain, traditionally in hard maple and now also in walnut, birch or teak. It suits an island or a baking station in a farmhouse, beside stone on the wet runs. Wood needs oiling and does not belong right around the sink, so we plan where it goes before you commit.

Fitting an older house

A farmhouse kitchen has had decades to settle. We template the walls as they stand, scribe the back edge where a wall bows, and level the cabinets before stone goes on.

What a Weaverville upgrade costs

A builder-grade kitchen upgrade in Weaverville is typically estimated at roughly $2,500 to $6,000 for the counters alone, and a quartzite job sits higher because the stone does. Quartz is generally estimated at about $60 to $150 per square foot installed, quartzite at roughly $80 to $250, and a butcher block island or accent top at around $2,000 to $5,000.

What moves a Weaverville quote:

  • Square footage and slab count, which the builder's layout mostly decides.
  • Material and grade, with quartzite the widest spread.
  • Tear-out and disposal of laminate or entry granite.
  • A taller backsplash replacing the builder's four-inch splash.
  • Edge profile and thickness.
  • Any cabinet leveling, or a support rail under a new overhang.
  • The sink: keeping the existing bowl or moving to an undermount, which changes the cutout.
  • Disconnecting and reconnecting the sink and faucet, done by a licensed plumber on the install schedule.

Treat every figure on this page as an estimate for typical work; each one is subject to change after the measure and your slab choice. Your written quote sets the final price and lists each line on its own.

Planning around a busy household

A Weaverville upgrade is planned so the kitchen is out of use for as short a window as possible, and the dates are agreed at the measure and written on the quote rather than guessed on the phone.

Before the tear-out

We template on the existing cabinets, walk the path from the driveway to the kitchen, and confirm the sink and faucet models. You clear the counters and the cabinets under the sink the night before.

Choosing and approving

You choose the slab at the stone supplier's yard, then approve the seam and cutout layout marked on it. Nothing is cut until you sign off.

Install day

The old tops come off, the cabinets are checked again, and the new tops go on with seams glued and the sink sealed. The crew cleans up before leaving.

After install

Your plumber reconnects the faucet and drain. Quartz is ready to use once the sink sealant has cured; a natural stone may need its first sealing, and we tell you which on the day. The window between tear-out and a working sink is the part of the schedule we protect most, so the plumber's visit is booked when the install date is.

Questions

Weaverville Countertop Questions

Can I keep my builder cabinets and only replace the tops?

Yes, in most Weaverville houses from the 2000s and 2010s. We check each run is level, fastened and strong enough for stone at the measure, and add support where a new overhang needs it.

Should I choose quartz or quartzite?

Quartz gives an even look with no sealing but dislikes hot pans. Quartzite is a harder natural stone with more movement and better heat tolerance, and it costs more. Test any quartzite slab before you buy.

How much does it cost to replace builder countertops in Weaverville?

A standard kitchen is typically estimated at roughly $2,500 to $6,000, higher for quartzite. Those are estimates, subject to change, and the written quote after your measure sets the final price.

Does soapstone suit a farmhouse kitchen?

Often, yes. It takes heat well, darkens into a patina and looks at home with an apron sink. It is soft and will scratch, so it suits owners who like a surface that shows its use.

Can you put butcher block on the island and stone on the rest?

Yes. Wood on the island and stone on the sink and range runs is a common mix. We keep wood away from the sink and plan where the two materials meet.

How long will we be without a kitchen?

The window runs from tear-out to the plumber's reconnect, and we set those dates together at the measure. They are printed on your quote so you can plan meals around them.

What happens to the old laminate or granite?

We remove it and haul it away as a line on your quote. A licensed plumber disconnects the sink and faucet before we lift the old top.

Do you cover the Reems Creek area and the roads north of town?

Yes. We measure and install across Weaverville, out toward Reems Creek and along the Interstate 26 corridor north of Asheville, as part of our Buncombe County coverage.

Free in-home measure

Talk to us about countertops in Weaverville

Free measures across Buncombe County. Builders, cabinet shops and property owners can send drawings for a bid.

Call (828) 470-1105

Licensed, bonded & insured. Calls only, we do not receive text messages.

Call (828) 470-1105Licensed, bonded & insured